D-Link is one of internet sharing router Manufacturer Company in all over the world compare to TP-Link, Asus Wireless router, Cisco Linksys and has lots of Wi-Fi Routers to share internet connection to wireless devices such as Laptops, android smartphone, windows phone. Here is the tip to set D-Link 3G Wi-Fi Router with MultiSIM data card with BSNL, Airtel, Aircel, Idea, Vodafone, Loop, Reliance mobile, Tata Docomo also 3G CDMA/EVDO dongles like Reliance Netconnect+, Tata photon plus, MTS MBlaze.
This article helps to find APN (Access Point Name) Manual 3G Dongles Datacard internet APN settings for Tablet PC
Manual D-Link 3G Wi-Fi Router settings:
Most of data cards are able to get auto plug and play settings (when device plugged and settings configured automatically). If you have any problem in setting a new internet sharing in the Setup section, The Internet connection configurations are to be done as follows.
My internet connection is: 3G
Username: provided by data network (blank)
Password: provided by network (Blank)
Dialled Number: #777
APN: leave blank
Reconnect mode: Auto
Step by steps manual setup
Connect the data card (example: Tata photon, Reliance Netconnect) in the usb socket of the router
Connect one end of the ethernet cable into the socket of the router and second end into the ethernet port of your desktop or laptop
Open any web browser on your computer and in the address bar type http://192.168.0.1
In the username field type admin and in the password field also type admin (unless you have changed the password)
On the main router page click on setup, click on the second option that says manual internet connection setup
In internet connection type, select 3g
In 3G internet connection type, select the following options
Dialup profile- Manual
Verify password- internet
Dialed number- #777
Click on save settings, the router will restart in 45 seconds
Repeat steps 4 and 5, click on setup, go to wireless settings, manual settings and go with enable wireless, enter your desired network name and in 802.11 mode select B/G/N mixed
Select auto channel scan, visibility status as visible
security mode WPA- Personal
WPA mode- WPA2 only, cipher type TKIP
Type your desired network key and click on save settings and again the browser will restart in 45 secs.
That’s it your router is ready to share any data card internet connection in wireless mode.